LumberJocks

2018 Box Swap Entry

  • Advertise with us
Project by PoohBaah posted 05-01-2018 04:31 PM 1623 views 13 times favorited 39 comments Add to Favorites Watch

Here is the box I created for EarlS and sounds like more so Earl’s family. It is quarter sawn sycamore and walnut. I created the contrasting checkered pattern on the corners by laminating the two types of wood together before cutting the box joints. I had seen a box in this style before and I fell in love with it and really wanted to recreate it. I think it came out amazingly. The top and bottom are also walnut. I also stepped way out of my comfort zone and created the hinges. They are old barn oak that is pushing 100 years old. Crafting these hinges allowed me to do a lot of shaping with files and rasps and using these hand tools were all new techniques to me. It was a learning experience to say the least.

The walnut was milled from my wife’s family farm. The hinges are old barn oak that is pushing 100 years old and the sycamore came from a new lumber source I discover 20 minutes away from my place. I was really excited to find this place so close to home and with such an exotic and domestic selection.

I love doing these swaps since it is a great way to stretch your abilities and to meet new folks. Great time again and thanks to Dave for putting this one on.

-- Neil, Indiana - Instagram: neilsalomon





39 comments so far

View KelleyCrafts's profile

KelleyCrafts

3270 posts in 912 days


#1 posted 05-01-2018 04:35 PM

That is extremely beautiful. The laminated pieces to make the checkered pattern is genius. This is one of the top boxes in the swap for sure. Well done Neil!

-- Dave - http://kelleycrafts.com/ - pen blanks - knife scales - turning tools

View hairy's profile

hairy

2780 posts in 3705 days


#2 posted 05-01-2018 04:37 PM

Awesome! Very creative.

-- My reality check bounced...

View EarlS's profile

EarlS

1758 posts in 2521 days


#3 posted 05-01-2018 04:38 PM

That looks familiar!!! You managed to capture the walnut figuring much better than I was able to. The whole box shimmers in the sun. I’m going to try to make wood hinges now that I have something to look at.

Thanks again for a great box, and my daughter says “thank you” as well.

-- Earl "I'm a pessamist - generally that increases the chance that things will turn out better than expected"

View Dave Polaschek's profile

Dave Polaschek

2700 posts in 755 days


#4 posted 05-01-2018 04:38 PM

That’s one darned nice box, Neil! Well done, buddy!

-- Dave - Minneapolis

View mikeacg's profile

mikeacg

714 posts in 1230 days


#5 posted 05-01-2018 04:48 PM

Quartersawn anything is cool! I get a lot of it out of my firewood pile (It’s a wonder I don’t freeze to death from lack of actual burning wood!).
And here I thought the corners were mortised! Well done on this box! Looking forward to you next swap!

-- Mike, A Yooper with a drawl, http://www.artcentergraphics.com

View PoohBaah's profile

PoohBaah

407 posts in 1713 days


#6 posted 05-01-2018 04:49 PM

Thanks guys, I appreciate the kudos. Earl I am going to do a write up here in the next few days on the hinges and how I made them. I was able to capture the lid color better bc it was still wet when I took that picture. So I cheated a little bit.

-- Neil, Indiana - Instagram: neilsalomon

View HokieKen's profile

HokieKen

6594 posts in 1311 days


#7 posted 05-01-2018 05:14 PM



...The laminated pieces to make the checkered pattern is genius…

- KelleyCrafts

Yeah, that^!! That’s a brilliant method to produce that look. And, geeze those woods are beautiful! If you’ve got any of that QS Sycamore you’re interested in swapping, I’ve got some nice stuff… So do the local breweries ;-))

I’m looking forward to the write-up on the hinges too!

-- Kenny, SW VA, Go Hokies!!!

View Lazyman's profile

Lazyman

2559 posts in 1560 days


#8 posted 05-01-2018 05:14 PM

So far, my favorite of the swap boxes I’ve seen on the reveal. That sycamore is fantastic and I am definitely going to shamelessly borrow that laminated sides idea for finger joints some day. The wood hinges are great too!

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View Mainiac Matt 's profile

Mainiac Matt

8498 posts in 2501 days


#9 posted 05-01-2018 05:19 PM

Stunning box…. I love it.

-- I yam what I yam and that's all what I yam

View Clarkswoodworking's profile

Clarkswoodworking

270 posts in 306 days


#10 posted 05-01-2018 05:32 PM

Very nice !
You made that wood POP

Scott

View jeffswildwood's profile

jeffswildwood

3549 posts in 2150 days


#11 posted 05-01-2018 05:32 PM

This is a remarkable box! I fell in love with the checkered pattern in the corners and have tried to figure it out.

-- We all make mistakes, the trick is to fix it in a way that says "I meant to do that".

View Clarkswoodworking's profile

Clarkswoodworking

270 posts in 306 days


#12 posted 05-01-2018 05:42 PM

What size it ?
Thanks
Scott

View duckmilk's profile

duckmilk

3210 posts in 1497 days


#13 posted 05-01-2018 06:20 PM

That sycamore is stunning Neil, and the contrast with the walnut just makes it more so. Nice job!

-- "Duck and Bob would be out doin some farming with funny hats on." chrisstef

View sras's profile

sras

4919 posts in 3302 days


#14 posted 05-01-2018 06:31 PM

Love the details! Nice work!

-- Steve - Impatience is Expensive

View Timmy2Hands's profile

Timmy2Hands

186 posts in 1137 days


#15 posted 05-01-2018 07:06 PM

A Jewel for sure. Great work!

-- Tim

showing 1 through 15 of 39 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com