LumberJocks

Tea Boxes

  • Advertise with us
Project by bondogaposis posted 10-10-2018 04:18 PM 1001 views 12 times favorited 21 comments Add to Favorites Watch

I took a break from my furniture project and made a these tea boxes. The woods are birch, walnut and lacewood; and birch and sycamore. Thanks for looking.

-- Bondo Gaposis





21 comments so far

View Hazem's profile

Hazem

182 posts in 1451 days


#1 posted 10-10-2018 04:44 PM

Very nice.

Simple yet elegant.

View EarlS's profile

EarlS

1939 posts in 2551 days


#2 posted 10-10-2018 04:58 PM

I like the one on the left. The color of the lacewood lid threw me off for a minute. Initially, I thought it might be paduak. I also thought the birch was cherry at first.

The contrast between the walnut, lacewood and birch is striking. Plus the birch plugs make a nice contrast on the sides. The lid looks like it curves ever slightly as well. I’m also going to shamelessly “borrow” the lid handle. How is the lid attached to the box? Judging by the plug, it might be a rod through the sides?

-- Earl "I'm a pessamist - generally that increases the chance that things will turn out better than expected"

View Andre's profile

Andre

2217 posts in 2009 days


#3 posted 10-10-2018 05:13 PM

Good looking boxes, I am a big Tea drinker but only loose leaf.

-- Lifting one end of the plank.

View bondogaposis's profile

bondogaposis

5093 posts in 2554 days


#4 posted 10-10-2018 05:20 PM

EarlS, the dowels are not birch, but rather bamboo, corn dog sticks to be precise. The “hinge” is just 2 brass pins inserted through the sides into the lid. Here is a close up.

-- Bondo Gaposis

View TonyArru's profile

TonyArru

64 posts in 2417 days


#5 posted 10-10-2018 05:44 PM

I love how simple these appear to be, almost effortless…as if you walked into your shop one day and there they were, ready to be used. The dowel and glue joint looks great and so neat (meaning, tidy…not like, groovy) I am certainly inspired by these as a novice box maker, this might design seems to be less daunting than cutting dovetails.
Thank you for posting.
Well done.

-- Tony S. Arru, Connecticut

View Ocelot's profile

Ocelot

2113 posts in 2841 days


#6 posted 10-10-2018 05:52 PM

Those are very pleasing boxes. I’m partial to sycamore so I’ll say the one on the right for me, but the other is also very nice.

Corn dog sticks?! Nice!

But I’m a loose-leaf guy too, and just made a pot a few minutes ago. I suppose one could make a box for loose tea too, but I just keep it in the bag it came in.

-Paul

View TonyArru's profile

TonyArru

64 posts in 2417 days


#7 posted 10-10-2018 05:54 PM

I love how simple these appear to be, almost effortless…as if you walked into your shop one day and there they were, ready to be used. The dowel and glue joint looks great and so neat (meaning, tidy…not like, groovy) I am certainly inspired by these as a novice box maker, this might design seems to be less daunting than cutting dovetails.
Thank you for posting.
Well done.

-- Tony S. Arru, Connecticut

View PPK's profile

PPK

1199 posts in 1012 days


#8 posted 10-10-2018 08:08 PM

I like!!
I think the Birch and sycamore one is my favorite. My wife would love these – she likes an assortment of tea all at her fingertips in a box like this…

-- Pete

View therealSteveN's profile

therealSteveN

1714 posts in 777 days


#9 posted 10-10-2018 09:49 PM

Beautiful from the wood through all the details. Love the brass pin hinge, Always have liked the look of a dowel/pinned corner more than a DT. Plus you filled the interior with something besides space.

Nice boxage, thanks for posting, and Congrats on your 3.

-- Think safe, be safe

View KimAccurso's profile

KimAccurso

384 posts in 343 days


#10 posted 10-10-2018 10:55 PM

These are really nice! I do love the simplicity like the comments above. I have made boxes in this style and am curious, could you post a picture of the back side, how you did the back side to interact with the lid? Very nice work and congratulations on your Top 3.

-- Kim - imperfection is the pursuit of perfection

View bondogaposis's profile

bondogaposis

5093 posts in 2554 days


#11 posted 10-11-2018 02:34 AM

Kim, the underside of the lid on the back side is radiused, so that it has clearance to open. I used 5/16” radius router bit. You also have to elevate the lid off the back just a sliver, less than 1/16” to get the clearance for it to swing.

-- Bondo Gaposis

View doubleDD's profile

doubleDD

7896 posts in 2246 days


#12 posted 10-11-2018 02:48 AM

Tea boxes will never be the same. Nice work.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View majuvla's profile

majuvla

13376 posts in 3070 days


#13 posted 10-11-2018 05:15 AM

Beautiful pieces, very nice boxes.

-- Ivan, Croatia, Wooddicted

View KimAccurso's profile

KimAccurso

384 posts in 343 days


#14 posted 10-11-2018 11:36 AM



Kim, the underside of the lid on the back side is radiused, so that it has clearance to open. I used 5/16” radius router bit. You also have to elevate the lid off the back just a sliver, less than 1/16” to get the clearance for it to swing.

- bondogaposis

Thanks for adding these pictures, I think not lifting the lid a hair is what I missed. Ugh – such a simple thing! – I’m having one of those “duh…” moments :)

-- Kim - imperfection is the pursuit of perfection

View Peteybadboy's profile

Peteybadboy

522 posts in 2152 days


#15 posted 10-11-2018 11:48 AM

Really like the explanation of the build, thanks. Love the boxes.

-- Petey

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com